The Clivia is strong and easy to cultivate, but it is not easy to raise it. Especially in day-to-day management, irregularities such as uneven blade arrangement often occur, affecting their ornamental value.

The arrangement of leaves is not neat. Some Clivia leaves are susceptible to seven-to-eight twisting. This is because there are few positive auxins between the leaves and the leaves grow slowly. The auxin on the backlight is more and grows faster, while the stems and leaves are always on the slower growth side. Curved, prone to "bamboo" phenomenon. Therefore, in the conservation of flower pots should be rotated regularly, the growth season is generally a 7-day rotation; slow growth season is generally 10 days once. If there is no blade on a straight line, two bamboo baskets can be used to bend into a semi-circular shape to insert into the soil and clamp the blade. After a while, the blade can be gradually adjusted. It can also be formed by light shaping, that is, cutting with an opaque thick paper. A paper strip that is substantially the same width as the leaves and then folded longitudinally from the middle, enveloping half of the blades that are oblique in the sun's direction, and then sticking the thick paper on the front and back of the blade with transparent strips for 10 days to 15 days. The leaves of the dragonfly will be corrected.

There are many reasons for the root rot caused by rot roots. For example, when the pot is not sterilized, the root rot bacteria invade from the wound; when transplanting, changing the pot, the root system is damaged; improper fertilization during the growth period results in reverse osmosis, causing the root system. Dehydration and dry death; more water in the basin, causing rot; soil alkalization, potted soil compaction, poor permeability and permeability. To prevent rot, in addition to the need to sterilize the cultivating soil in the upper pot, we must also rationally apply fertilizer and water. Once rotted, remove the plants from the pots, remove the soil, rinse off with fresh water, cut off the rot, remove the dead roots, sterilize with 0.1% potassium permanganate for 5 minutes, and apply the ash or sulfur on the wound. Powder and other disinfection. After the treatment is finished, it is planted into a new culture soil, and the root system can be buried. Then, the water is poured once and maintained in a shady environment at 20° C. After the new leaf grows, it can be normally managed.

Dry tip and yellow edge potted clivia should maintain sufficient light, but it is not resistant to light, if the light is too strong, dry air, poor ventilation will appear dry tip, yellow edge phenomenon. Therefore, special attention should be paid to increasing the humidity in the management.

There are many reasons why clip arrows cause clip arrows. Inappropriate temperatures and improper watering can cause arrow clips. For mature Clivia, when the vegetative growth of plants is transferred to reproductive growth, attention should be paid to the observation of changes in pseudobulbs. If a pseudobulb is raised and one side is hypertrophic, indicating that the arrowhead is forming, then fertilization should be stopped for two weeks. Will cause leaf sheath and pseudobulb to be harder and more stressful, causing clipped arrows. If the bulb pressure is caused by excessive bulb pressure, use a sterile knife to cut 1.5 cm of the leaf sheath holding the arrow, reduce the pressure on the arrowhead of the sheath and promote the arrow.

Industrial 100Hz LiDAR Solutions

Industrial Laser Distance Sensor of the IT02S & IT03M series are designed for measurements of moving targets. The LiDAR distance sensor is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 3 centimeters and as far as 15 meters! The LiDAR laser sensor is widely used in many innovative applications on the market, including smart dustbin, unmanned supermarket etc.long distance control system.

Application areas of the sensor are:
> Harsh environments, like outdoors in strong sunlight

> Black surface can be up to 8m
> UAV/Drone Systems
> Intelligent Parking
> Smart Measure Systems
> Intelligent toilet

Industrial Lidar Sensor,Tof Laser Measurement Module,Tof Sensors,Time Of Flight Distance Sensor

Chengdu JRT Meter Technology Co., Ltd , https://www.cdlaserdistancemeter.com