The wrong way to repair agricultural machinery

First, use heavy ropes to hang heavy objects. When lifting the tractor, use hemp rope, nylon rope, triangle belt, etc.

Second, the wrong way to support the vehicle. When the tire is damaged or replaced, support it with bricks, stones, wooden blocks or a jack alone.

Third, tire inflation is not safe operation. The tires are re-inflated after being disassembled and unprotected.

Fourth, repair brakes wrong operation. When repairing the brakes, hand and foot brakes are repaired at the same time. The correct operation is to separately repair the brakes of the hands and feet so as to brake each other and ensure safety.

Fifth, debug the engine with incorrect operation. When commissioning the machine, personnel approach dangerous parts such as fans, belts or exhaust pipes or place tools and parts on the machine.

Sixth, maintain the wrong operation of the transmission mechanism. Move the hand or other object to the transmission station; the belt joint is not firmly installed; the belt is lifted during the operation of the machine; the belt is pulled by hand; when the belt tightness is adjusted, the machine does not turn off; it crosses over the belt.

Seventh, the maintenance of suspension equipment error operation. When the suspension implement is being repaired, it is performed after the suspension implement has not landed and stopped; when the suspension implement is attached, the medium and large throttles are used, the attachment speed is too fast, or the vehicle is not prepared to stop at any time; during maintenance, the soil is removed or the soil is removed; When the lower part is under maintenance, the flameout is not supported without shutting down.

Eight, the wrong operation started with the start rope. When starting with the starter rope, start the rope around the hand to pull the rope, or start the rope around the flywheel for more than 1.5 turns; when the flywheel is turned by hand, the oil is continuously turned off and the power is turned off too quickly.

Nine, shake the wrong start operation. The maintenance personnel used the thumb and the remaining 4 fingers to hold the handle separately; lower the handle instead of lifting the handle; hold both hands to shake the handle and turn for 1 week.

X. Repair the wrong operation of electrical equipment. When the electrical equipment is repaired, repair is performed without removing the battery wire in advance, resulting in sparks and injuries caused by hot wire grounding; use metal containers when preparing electrolyte; when dilute concentrated sulfuric acid, pour water into concentrated sulfuric acid to cause acid splashes to burn people.

Eleven, the wrong operation when disassembling the spring. Disassembly and assembly of clutch springs, valve lock clips, etc., without special tools, and picking up with a screwdriver, etc., will cause springs to pop and hurt people.

The Protein Powder of Tenebrio molitor is mainly composed of mealworms, which is rich in various amino acids and 
mineral elements, and contains a variety of vitamins needed to maintain life and health. It is an ideal high protein feed 
and feed additive for various pets, fish, birds, forest frogs, etc. regular feeding can promote the growth of pets, 

various fish and special animals and improve their disease resistance.

61

Protein Powder

Fenxi Kangruilai Biotechnology Co., Ltd. , https://www.kangruilai-petfeed.com