Home cooking common faults and treatment methods

Home cooking common faults and treatment methods Main symptoms Causes and problems Leakage gas 1. The gas distribution pipe or the stove pipe is not tightly connected 2. The rubber pipe and plastic pipe will age and crack. 3. The sealing between the valve core and the valve is not 1. Tighten the connector 2. Replace the new tube 3. Apply seal oil or replace the tempering 1. The lid and the burner head do not cooperate well 2. The throttle opening is too large and the primary air volume is too much 3. Cooking pot If the position is too low, the burner head is overheated. 4. The air supply nozzle is blocked 5. The ambient air velocity is too high 1. Adjust or replace the fire cover 2. Adjust the air damper 3. Adjust the pan position 4. Clear the blockage 5. Adjust the door and window Degree off the flame off the fire 1. The throttle opening is too large, the ambient wind speed is too large 2. The spray hole diameter is too large 3. The supply pressure is too high 1. Adjust the damper, control the ambient wind speed 2. Reduce the nozzle aperture or replace the nozzle 3. Off Small valve yellow flame 1. The throttle opening is too small 2. The secondary air supply is insufficient 3. The ejector has dirt 4. The nozzle and ejector throat misalignment 5. The nozzle hole is too large 6. The pot bracket is too low 1. Open the throttle 2. Remove the debris around the burner head 3. Remove the dirt 4. Adjust the alignment 5. Reduce the nozzle hole diameter 6. Adjust or replace the pot bracket auto-ignition 1 Small fire nozzle or gas pipe plugging 2. The relative position of the small fire burner and the main burner is not suitable for ignition 3. The primary air volume is too large 4. Water is in the hole 5. The igniter electrode or insulated needle is dirty 6 • Bad contact or burnout of the wire and the electric level 7. Damage to the circuit or component of the pulse igniter 8. Poor contact or failure of the piezoelectric ceramic 9. Improper distance between the ignition stage 10. The misfired stage is not aligned with the small fire ignition hole 11. No battery or battery failure 1. Unblock 2. Adjust the position of the small fire burner 3. Adjust the throttle 4. Wipe clean 5. Wipe with dry cloth or big sandpaper 6. Adjust or replace 7. Ask the professional to repair 8 Adjustment or replacement 9. Adjusting the proper position 10. Debugging 11. Loading or replacing the battery knob does not move 1. Spindle oil is dry 2. Knob worn 1. Apply a thin layer of butter or vegetable oil 2. Replace the new knob

Arch greenhouse is a kind of economical greenhouse, which is welcomed by the users with graceful curve form and low cost. It has beautiful appearance, fluent visual, reasonable structure and good performance for keep temperature. It is economical greenhouse because of its relatively low manufacturing cost. It can be applied in most areas of China. Double membrane greenhouse is used more in north of China, while single film greenhouse is used more in southern region. It can get maximum sunlight when visible light is within the scope of 0.4 to 0.7 microns and form a thick envelope, which can effectively prevent heat loss and prevent the invasion of cold air. Adopting a double membrane can greatly improve heat preservation performance of the greenhouse and save operating cost. The top cover material is polyethylene lifelong anti-fog and anti-dipping film po-covering. The outer of it has the function of UV protection and the inner has the function of preventing from the sets of dew. According to the needs of customers, the sides of the greenhouse can be covered with polyethylene lifelong anti-fog and anti-dripping po-covering or polycarbonate hollow plate.

Multi Span Plastic Film Greenhouse

Pc Board Greenhouse,Pc Sheet Covering Greenhouse,Greenhouse Pc Board

JIANGSU SKYPLAN GREENHOUSE TECHNOLOGY CO.,LTD , http://www.spgreenhouse.com