Zui big valve wholesale base in Henan area Hydraulic and pneumatic balance angle three-way mud valve 1Order of Zhezheng valve exhaust valve, mud valve product series: should specify the exhaust valve, mud valve type, nominal pressure, nominal diameter, connecting flange standard, rated flow coefficient Cv, working medium and medium temperature â‘¡ If positive Zhejiang balanced three-way valve pneumatic mud valve has been selected by the design, fluid balancing model three-way mud valve, press the model directly to our Sales Department Order. Tea Cup Holder,Diatomite Products,Soap Dish Diatomite,Soap Diatomaceos Earth Dongguan Vanilla Bioengineering Co., Ltd. , https://www.healthecigarette.de Pneumatic balance three-way mud valve, hydraulic balance three-way mud valve ordering instructions:
[Pneumatic balance three-way mud valve] [hydraulic balance three-way mud valve]
This product is mainly used in various types of water tanks of the water company. It can also be used to exclude sediment or sewage from the bottom of the pool and can also be installed in industrial pipelines such as water, gas and oil for interception.
Working principle and performance characteristics
This product consists of two parts: hydraulic cylinder and balance angle three-way stop valve. The hydraulic cylinder is powered and drives the valve plate to lift and lower, so that the valve body passage is opened or closed to achieve fluid continuity. The product features such as The installation of one product in the middle of the two pools at the same level can make the pools on both sides drain at the same time, saving investment and so on.
The hydraulic cylinder piston seal is made of V-shaped rubber, which has good sealing performance and durability. Its life span is more than five years, and the feedback information after the user has been used for up to seven years has not been replaced. The valve plate is soft sealed. After sealing, the sealing performance is good, there is no leakage, and it is easy to repair and replace. If equipped with electromagnetic reversing valve and accused hydraulic cylinder, it can realize remote control and automatic control, and can also be equipped with electric power. If equipped with manual device, it can be installed in 2~12 sets, and the control can be turned on or off at the same time. The opening speed is fast, the driving pressure is low, the pressure source takes the pressure of the water plant itself, no need to add equipment, save manpower and material resources, save energy and so on. .
Technical Parameters
1. Hydraulic cylinder drive medium: water, gas, oil (specify when ordering)
2. Hydraulic cylinder driving pressure: 0.15~0.3, 0.3~1.1Mpa
3. Hydraulic cylinder drive medium temperature: normal temperature
4. Body material: HT200, QT400-15
5. Flange connection standard: GB/T13927-92
6. Pressure test standard: GB/T13927-92
Note: If you need to bring information feedback signal, please negotiate separately.
Fourth, hydraulic, pneumatic balance angle three-way mud valve profile flange connection size table
model
size
J747X-1.0 J647X-1.0
Take-up thread
G"
Nominal diameter
H
H1
L
D
D1
Z - ∮d
100
800
150
360
220
180
4-19
1/2"
150
940
170
400
285
240
8-23
1/2"
200
1000
190
460
340
295
8-23
1/2"
250
1200
220
560
395
350
12-23
1/2"
300
1350
270
590
445
400
12-23
3/4"
350
1500
300
650
505
460
16-23
3/4"
400
1620
325
700
565
515
16-28
1"