With the increase of water environment pollution and the national energy conservation and emission reduction policy requirements, many provinces and municipalities have proposed A standard discharge, which is the upgrading of the sewage treatment plant. In the process of upgrading the standard, in addition to carrying out the necessary chlorine dioxide generator precipitation filtration In addition to anaerobic digestion, disinfection has also become an important part. What should you pay attention to when using chlorine dioxide generator? Tattoo Thermal Copier Accessories Tattoo Thermal Supplies Paddy Irons Tattooo Factory , http://www.paddyironstattoo.com
First, every time you use it, you should check whether the mixture tank of the chlorine dioxide generator and the liquid tank of the metering pump are aging and leaking. If there is such a phenomenon, apply it in time and rinse the raw materials with clean water to prevent it. Flushing does not completely cause the raw materials to hurt people. It should also check the fastening of the horizontal pump foot screw and the connecting screw of the west suction pump, whether the pump lubrication cooling water pipe is unblocked, and whether the pressure reaches the specified value.
Second, every time you turn on the power, you should know about the voltage, current and body temperature of the chlorine dioxide generator. If there is a wide range of changes, you should handle it in time. Before running, you must confirm whether there are anyone around the unit. Prevents injury when the pump shaft rotates. Always disconnect the power supply before the chlorine dioxide generator pump is repaired to avoid operational accidents. For the inspection of the unit, it is necessary to check whether there is severe vibration or noise.
Third, we must pay attention to the problem of the chlorine dioxide generator barrel material, if it is insufficient, even if it is replaced, avoid the use problem. Lubricating oil in the water pump box of the chlorine dioxide generator, in order to prevent oil quality deterioration, we must pay more attention to it, and replace it at any time. For the oil quality and oil level in the bearing housing, we find that the lubricating oil has deteriorated, emulsified and oil level. When it falls, it should be replaced or added in time.