As the international and domestic fuel prices continue to rise, the price of agricultural machinery fuel is also rising. In order to reduce the production cost and save oil, the following introduces some methods of fuel saving to agricultural machinery.

First, keep the engine's normal working temperature, especially in the cold season, keep the water temperature at 75-90 °C and use the oil according to the season.

2. Regularly remove scale from the cooling system and grease and deposits from pipes and silencers.

Third, the correct adjustment of the brakes often check the front and rear wheels of the tractor to maintain normal tire pressure.

Fourth, keep the electrical system and starting mechanism performance intact. Do not idle the engine for a long time and stop immediately.

5. The locomotive load should be appropriate. Practice has proved that the load is about 85%, the most fuel-efficient, and the most economical to avoid the phenomenon of "big horse cart" or "small horse-drawn cart" to avoid wasting fuel.

6. Choose the appropriate driving speed. Medium and light load use "high-grade small throttle". Do not fly the throttle and do not speed.

7. Reasonably select agricultural machinery and contiguous operations. Properly plan the field and driving routes to minimize idling, idling, roundabout, stopovers, shorten the total distance of the work, and reduce the inefficient energy consumption.

Eight, timely and reasonable technical maintenance to keep all parts and institutions often in good technical state without disease.

Nine, the use of metal cleaning agent instead of gasoline, kerosene, diesel cleaning machine parts not only saves oil and is easy to use.

Ten, purification of oil, metering and refueling. If the impurities in the oil are not precipitated before use, the plunger and the needle valve will be harmed, and the locomotive power will decrease and the fuel consumption will increase. Therefore, the general oil should be precipitated for more than 48 hours before use.

11. Prevent oil leakage. Due to the long-term use of the machine, the joints may be damaged. Improper assembly damage, loose screws, deformation or cracking of the pipe, and aging of the seals may cause oil leakage. Therefore, it is necessary to take corresponding countermeasures to stop the fuel economy in time. (Miao Yu)