After the use of agricultural machinery and maintenance matters

Some users only buy new machines for seasonal use. After they use them, they are allowed to stay in the sun and rain. When they are used again, they often find that the machine cannot be turned, and the cylinders, piston rings, valves, seat rings, and conduits in the engine are all available. Rushed to death, the loss is very large. In order to avoid this from happening, the following special maintenance must be performed on machines that are used for a longer period of time after they are used:
1. Clean the exterior of the machine, including farm implements.
2, put the machine in a ventilated and dry place.
3. Discharge all the cooling water in the water pipes and tanks.
4. Start the machine for about 20 seconds to evaporate the residual moisture in the body.
5. Shake the crankshaft, set the machine at the beginning of the compression stroke (at this time, the intake and exhaust valves are closed, the high-pressure pump's roller is not pressed by the camshaft's cam), keep this position, move the intake and exhaust The mouthpiece is bandaged to prevent falling insects and other impurities.
6. Apply a layer of fresh engine oil to the parts of agricultural machinery and machinery that are easily rusted.
7. Every two months or so, untie the packing of the intake and exhaust nozzles, start the machine for more than ten seconds (without adding cooling water), reinstall the machine in the original parking position, and re-wrap the intake and exhaust pipes. mouth. Maintenance like this can be done when the machine is in operation, and the phenomenon of rusting does not happen at all.
The thresher, pump, crusher and other machines should be cleaned of their appearance, and apply rust-proof oil on the rust-proof parts. Then cover the inlet and outlet ports to prevent hard objects from falling into it. For the pump, the water in the pump housing should also be drained.

Medical Ward Nursing System

Eter Ward Information System is an indispensable important part in hospital digitization construction, which not only provides the powerful communication among doctors, nurses and patients, but also creatively offers the new functions of voice reminding, information issuing, information collection, information process, and etc. This system has truly achieved a leap of nursing quality besides the greatly decreased of the work intensity of nursing staff.
     
Features of Ward Nursing System:
1. Act as management center that can be linked to PC with WNS software suitable for hospital, where internal communication is needed and is easy to be operated.
2. The Master Host can support 200 extensions (Included bed extension, door extension, bathroom extension); WNS software can record and check patient information.
3.Nurse Extension can broadcast for ward area.
4.Smart Handle have LED night light.
5.Bath Extension can receive the signals of nurse arriving and ward inspection.
6. Door Extension equipped with multicolour door lamp, can indicate different situation by different colour.
    

ETR ward nursing system is composed of the integrated host (including operating software), management host, bed extension, smart handle extension, nurse extension, door extension, mobile extension, extra bed extension, bathroom extension, connection extension, corridor display and various extended control devices.

 

Ward Nursing System

Ward Nursing System,Ward Nurse Call System,Urgent Nurse Call System,Nurse Call Systems

Hunan Eter Electronic Medical Project Stock Co., Ltd. , https://www.eter-tech.com